运载工程:2017,Vol:36,Issue(9):1441-1446
引用本文:
周国强, 张建平, 龚曙光, 胡胜. 发动机复合材料连杆传热的无网格模型与应用[J]. 机械科学与技术
Zhou Guoqiang, Zhang Jianping, Gong Shuguang, Hu Sheng. Meshless Model and Application for Heat Transfer of Engine Composite Materials Connecting Rod[J]. Journal Of Remote Sensing

发动机复合材料连杆传热的无网格模型与应用
周国强, 张建平, 龚曙光, 胡胜
湘潭大学机械工程学院, 湖南湘潭 411105
摘要:
利用无网格伽辽金法(Element-free galerkin,EFG)建立了发动机复合材料连杆的传热计算模型,推导了正交各向异性结构的无网格法传热控制方程,通过复合材料平板验证了该模型对混合边界条件传热问题有很好的适应性。利用EFG法计算了不同各向异性因子的复合材料连杆的温度场,并讨论了EFG节点数对精度的影响。结果表明,EFG法的温度计算精度比有限元法高,且各向异性因子小于1时能较好地改善连杆小头的温度场分布,连杆设计时宜选择横向导热系数比纵向大的复合材料。
关键词:    发动机    复合材料    传热    无网格伽辽金法    正交各向异性   
Meshless Model and Application for Heat Transfer of Engine Composite Materials Connecting Rod
Zhou Guoqiang, Zhang Jianping, Gong Shuguang, Hu Sheng
School of Mechanical Engineering, Xiangtan University, Hunan Xiangtan 411105, China
Abstract:
A calculation model for heat transfer analysis of internal combustion engines composite materials connecting rod was established with the element-free galerkin (EFG) method, and the heat transfer governing equation for the orthotropic structure based on the meshless method was deduced. The numerical example of composite materials plate was used to verify that the meshless model has a good adaptability for the heat transfer problem under the mixed boundary conditions. The temperature field of the composite materials connecting rod with different anisotropy factor was calculated with EFG method, and the effect of the EFG node number on the calculation accuracy was discussed. The result shows that the temperature based on the EFG method has a higher accuracy than that via FEM, and the temperature distribution of connecting rod small end can be greatly improved when the anisotropy factor is less than 1. The composite materials with the transverse thermal conductivity more than the vertical should be chosen for designing the internal combustion engines connecting rod.
Key words:    engine    composite    heat transfer    element-free galerkin method    orthotropy   
收稿日期: 2016-05-04     修回日期:
DOI: 10.13433/j.cnki.1003-8728.2017.0921
基金项目: 国家自然科学基金项目(51405415,51375417)、湖南省自然科学基金项目(2016JJ3120)及湘潭大学博士科研启动项目(14QDZ06)资助
通讯作者: 张建平(联系人),副教授,博士,zhangjp@xtu.edu.cn     Email:zhangjp@xtu.edu.cn
作者简介: 周国强(1990-),硕士研究生,研究方向为动力机械CFD与传热模拟、无网格法理论与结构优化,zhougqwill@foxmail.com
相关功能
PDF(1039KB) Free
打印本文
把本文推荐给朋友
作者相关文章
周国强  在本刊中的所有文章
张建平  在本刊中的所有文章
龚曙光  在本刊中的所有文章
胡胜  在本刊中的所有文章

参考文献:
[1] 贾德文,申立中,毕玉华,等.柴油机连杆大头轴承润滑特性影响因素的研究[J].汽车工程,2012,34(11):981-983,994 Jia D W, Shen L Z, Bi Y H, et al. A study on the factors affecting the lubrication characteristics of connecting rod big-end bearing in diesel engine[J]. Automotive Engineering, 2012,34(11):981-983,994(in Chinese)
[2] 郑光泽,袁林.发动机连杆动力学特性对活塞拍击的影响分析[J].汽车工程,2012,34(12):1119-1124,1140 Zheng G Z, Yuan L. A research on the effects of dynamic characteristics of connecting rod on the piston slap of engine[J]. Automotive Engineering, 2012,34(12):1119-1124,1140(in Chinese)
[3] Chen L W, Ku D M. Dynamic stability analysis of a composite material connecting rod by the finite element method[J]. Engineering Computations, 1991,8(1):57-68
[4] Chen N L, Han L Z, Zhang W M, et al. Enhancing mechanical properties and avoiding cracks by simulation of quenching connecting rods[J]. Materials Letters, 2007,61(14-15):3021-3024
[5] 戚刚,吴昌华,张南林.发动机连杆精细有限元分析模型和算法的研究[J].中国机械工程,2001,12(3):282-284 Qi G, Wu C H, Zhang N L. A study on modeling and algorithm of precise FE analysis of engine connecting-rod[J]. China Mechanical Engineering, 2001,12(3):282-284(in Chinese)
[6] 陶文铨,吴学红,戴艳俊.无网格方法在流动和传热问题中的应用[J].中国电机工程学报,2010,30(8):1-8 Tao W Q, Wu X H, Dai Y J. Applications of meshless methods in fluid flow and heat transfer problems[J]. Proceedings of the CSEE, 2010,30(8):1-8(in Chinese)
[7] 张建平,蒋炎坤,刘欣,等.发动机活塞传热的无网格RKPM计算模型及应用[J].内燃机学报,2013,31(1):78-83 Zhang J P, Jiang Y K, Liu X, et al. Meshless RKPM calculation model and its application in engine piston heat transfer[J]. Transactions of CSICE, 2013,31(1):78-83(in Chinese)
[8] 张建平,蒋炎坤,万里平,等.发动机活塞传热的三维无网格法模拟及试验验证[J].内燃机工程,2015,36(3):85-91 Zhang J P, Jiang Y K, Wan L P, et al. Simulation of engine piston heat transfer with 3D meshless method and its experimental verification[J]. Chinese Internal Combustion Engine Engineering, 2015,36(3):85-91(in Chinese)
[9] Jaberzadeh E, Azhari M, Boroomand B. Thermal buckling of functionally graded skew and trapezoidal plates with different boundary conditions using the element-free Galerkin method[J]. European Journal of Mechanics-A/Solids, 2013,42:18-26
[10] Yang H T, He Y Q. Solving heat transfer problems with phase change via smoothed effective heat capacity and element-free Galerkin methods[J]. International Communications in Heat and Mass Transfer, 2010,37(4):385-392
[11] Zhang X H, Ouyang J, Zhang L. Matrix free meshless method for transient heat conduction problems[J]. International Journal of Heat and Mass Transfer, 2009,52(7-8):2161-2165
[12] Singh A, Singh I V, Prakash R. Meshless element free Galerkin method for unsteady nonlinear heat transfer problems[J]. International Journal of Heat and Mass Transfer, 2007,50(5-6):1212-1219
[13] Belytschko T, Lu Y Y, Gu L. Element-free Galerkin methods[J]. International Journal for Numerical Methods in Engineering, 1994,37(2):229-256
[14] Chang Y P, Kang C S, Chen D J. The use of fundamental green's functions for the solution of problems of heat conduction in anisotropic media[J]. International Journal of Heat and Mass Transfer, 1973,16(10):1905-1918
[15] Wu S C, Liu G R, Cui X Y, et al. An edge-based smoothed point interpolation method (ES-PIM) for heat transfer analysis of rapid manufacturing system[J]. International Journal of Heat and Mass Transfer, 2010,53(9-10):1938-1950