机械动力学:2017,Vol:36,Issue(9):1357-1361
引用本文:
张朝烛, 董非, 张奇, 倪捷. 柴油机主轴承孔胀断工艺试验与模拟研究[J]. 机械科学与技术
Zhang Chaozhu, Dong Fei, Zhang Qi, Ni Jie. Simulation and Technological Experiment of Main Bearing Hole Splitting for Diesel Engine[J]. Journal Of Remote Sensing

柴油机主轴承孔胀断工艺试验与模拟研究
张朝烛1, 董非1, 张奇2, 倪捷1
1. 江苏大学汽车与交通工程学院, 江苏镇江 212013;
2. 一汽解放汽车有限公司无锡柴油机厂, 江苏无锡 214026
摘要:
针对柴油机主轴承孔圆度问题,在装配完成、温度为150 ℃和施加爆压3种状况下,对原机模型和胀断模型的主轴承孔位移进行数值模拟,分析了两种模型主轴孔周围位移的差异;制造出RuT450和HT250材料的试验件,运用试验对比方法,从材料材质、胀断面质量和主轴承孔径变化方面,对Ru450、HT250试验件和德国MAN公司的D26合金材料进行主轴承孔胀断工艺研究。结果表明Ru450在硬度和强度方面都能满足柴油机性能要求,且适合采用胀断技术。胀断后Ru450试样胀断面非常光整且材质组织非常致密,对主轴承孔径进行检测,发现所有样件孔径变化都不超过设定值0.1 mm,表明胀断后主轴承孔加工精度较高。
关键词:    柴油机    主轴承孔    胀断    铸铁    有限元   
Simulation and Technological Experiment of Main Bearing Hole Splitting for Diesel Engine
Zhang Chaozhu1, Dong Fei1, Zhang Qi2, Ni Jie1
1. School of Automobile and Traffic Engineering, Jiangsu University, Jiangsu Zhenjiang 212013, China;
2. Wuxi Diesel Engine Plant, Faw Jiefang Automotive Company, Jiangsu Wuxi 214026, China
Abstract:
On diesel engine main bearing hole roundness, the displacement of main bearing hole via original model and splitting model are simulated when it is assembled, at 150℃ and under explosion pressure. The stress difference around the main bearing hole is analyzed. With contrast test analysis, RuT450 materials and HT250 materials were used respectively to create specimen. With the comparison method, the influence of the material quality, the splitting surface quality and the change of main bearing hole precision on the fracture splitting technology of the main bearing hole among the Ru450, the HT250 specimen and the German company MAN D26 alloy material was studied. The results show that Ru450 can meet the performance requirements of hardness and strength for the diesel engine, and it is suitable for the use of splitting technology. The splitting surface of Ru450 specimen is very smooth and the material organization is very compact. The change in all main bearing hole detected in specimens does not exceed the setting value of 0.1 mm. It shows that the precision of the expanding hole after splitting is very high.
Key words:    diesel engine    main bearing hole    splitting    cast iron    finite element   
收稿日期: 2016-05-08     修回日期:
DOI: 10.13433/j.cnki.1003-8728.2017.0908
基金项目: 江苏高校优势学科建设工程项目(PAPD)资助
通讯作者: 董非(联系人),副教授,博士,jsdxdf@163.com     Email:jsdxdf@163.com
作者简介: 张朝烛(1992-),硕士研究生,研究方向为发动机结构与强度,m18852867048@163.com
相关功能
PDF(1054KB) Free
打印本文
把本文推荐给朋友
作者相关文章
张朝烛  在本刊中的所有文章
董非  在本刊中的所有文章
张奇  在本刊中的所有文章
倪捷  在本刊中的所有文章

参考文献:
[1] 周龙保,刘巽俊,高宗英.内燃机学[M].2版.北京:机械工业出版社,2005:315-319 Zhou L B, Liu X J, Gao Z Y. Internal combustion engine[M]. 2nd ed. Beijing:Machinery Industry Press, 2005:315-319(in Chinese)
[2] 陈家瑞.汽车构造[M].3版.北京:机械工业出版社,2009,2:30-36 Chen J R. Automobile structure[M]. 3rd ed. Beijing:Machinery Industry Press, 2009,2:30-36(in Chinese)
[3] 何东野,杨慎华,寇淑清.发动机曲轴箱轴承座裂解加工新工艺[J].新技术新工艺,2007,(9):53-46 He D Y, Yang S H, Kou S Q. The new fracture splitting technology of crankcase bearing block of engine[J]. New Technology & New Process, 2007,(9):53-46(in Chinese)
[4] Fukuda S, Eto H. Development of fracture splitting connecting rod[J]. JSAE Review, 2002,23(1):101-104
[5] 杨朝旭.发动机缸体主轴承座裂解加工数值模拟及裂解参量研究[D].长春:吉林大学,2013:24-46 Yang C X. Numerical simulation of engine crankcase bearing fracture splitting and research on parameters[D]. Changchun:Jilin University, 2013:24-46(in Chinese)
[6] 于歌.发动机缸体主轴承座裂解加工关键技术研究[D].长春:吉林大学,2012:1-14 Yu G. Research on key technology of engine crankcase main bearing block fracture splitting processing[D]. Changchun:Jilin University, 2012:1-14(in Chinese)
[7] 何东野.发动机缸体主轴承座裂解加工技术与装备研究[D].长春:吉林大学,2009:49-70 He D Y. Research on fracture splitting processing technology and equipment of engine crankcase bearing block[D]. Changchun:Jilin University, 2009:49-70(in Chinese)
[8] Gu Z, Yang S, Ku S, et al. Fracture splitting technology of automobile engine connecting rod[J]. The International Journal of Advanced Manufacturing Technology, 2005,25(9-10):883-887
[9] 王蒙.发动机缸体主轴承座材料裂解性能及加工数值模拟[D].长春:吉林大学位,2012:25-57 Wang M. Numerical simulation and material cracking performance of engine crankcase bearing fracture splitting[D]. Changchun:Jilin University, 2012:25-57(in Chinese)
[10] 李嘉,赵雨东.柴油机主轴承座的有限元强度分析[J].车用发动机,2007,(1):83-87 Li J, Zhao Y D. Strength FEM analysis on the main bearing wall of a diesel engine[J]. Vehicle Engine, 2007,(1):83-87(in Chinese)
[11] 寇淑清,王金伟,赵勇,等.脉冲激光加工连杆裂解槽数值仿真[J].吉林大学学报(工学版),2010,40(5):1256-1261 Kou S Q, Wang J W, Zhao Y, et al. Numerical simulation of pulsed laser processing conrod fracture splitting notch[J]. Journal of Jilin University (Engineering and Technology Edition), 2010,40(5):1256-1261(in Chinese)
[12] 寇淑清,杨慎华,金明华.发动机连杆裂解加工技术及其应用[J].机械强度,2004,26(5):538-541 Kou S Q, Yang S H, Jin M H. Fracture splitting technology and its application in manufacturing connecting rods of engine[J]. Journal of Mechanical Strength, 2004,26(5):538-541(in Chinese)
[13] 王彦菊.发动机连杆裂解过程数值模拟及裂解参量分析[D].长春:吉林大学,2009:67-71 Wang Y J. Numerical simulation of engine con-rod fracture splitting process and analysis on effect factors[D]. Changchun:Jilin University, 2009:67-71(in Chinese)
[14] 杨慎华,寇淑清,郑祺峰,等.发动机连杆裂解制造工艺及设备[J].汽车技术,2005,(2):29-32 Yang S H, Kou S Q, Zheng Q F, et al. Splitting decomposition manufacture technology and facilities of engine connecting rods[J]. Automobile Technology, 2005,(2):29-32(in Chinese)